EN 10305-5welded cold sized square and rectangular tubes, withdrawn in 2023
EN 10305-5 is withdrawn. Its last edition, EN 10305-5:2016, was superseded by EN 10305-3:2023 in December 2023.1, 2, 3 What it covered, welded cold sized tubes of square and rectangular cross-section, is now part of EN 10305-3.1, 4
- Standard
- EN 10305-5: Welded cold sized square and rectangular tubes2
- Tube
- Welded, cold sized2
- Purpose
- General precision applications2
- Cross-sections in scope
- Square and rectangular2
- Size limit in scope
- None in the published scope summary2
- European edition
- EN 10305-5:2016, the last edition2
- German edition
- DIN EN 10305-5:2016-08, withdrawn3
- Facts checked
- 20 November 2026
Why was EN 10305-5 withdrawn?
EN 10305-3:2023 was published in December 2023 and supersedes both EN 10305-3:2016 and EN 10305-5:2016.1, 7 Its foreword lists four changes: Parts 3 and 5 were merged so that one document covers welded cold sized tubes of all shapes; dimensions, thickness ranges and tolerances were aligned; steel grades were added; and the text was updated editorially.1
DIN’s catalogue marks DIN EN 10305-5:2016-08 as withdrawn and names DIN EN 10305-3:2024-02 as its replacement.3 The Estonian catalogue shows the 2016 editions of Parts 3 and 5 as withdrawn from 15 December 2023.8
What should be cited instead?
EN 10305-3 sets the technical delivery conditions for welded cold sized steel tubes: circular tubes with a specified outside diameter D of up to 193.7 mm, and tubes of square and rectangular cross-section. It may also be applied to other cross-section shapes.1, 4
What did the last edition cover?
The last edition covered welded cold sized steel tubes of square and rectangular cross-section, characterized like the rest of the series by defined dimensional tolerances and a specified maximum surface roughness. It named the automotive, furniture and general engineering industries as typical fields of application.2
A large European stockholder still listed square and rectangular welded precision tube under EN 10305-5 when we checked, from 10 × 10 × 1 mm to 70 × 70 × 4 mm square and from 20 × 10 × 1.5 mm to 100 × 40 × 3 mm rectangular, in +CR1 and +CR2 and in steel grades E220 and E235.9
Which editions were there?
| German edition | European edition | Status | Replaced |
|---|---|---|---|
| DIN EN 10305-5:2003-085 | EN 10305-5:2003 | Withdrawn | DIN 2395-1:1994-09, DIN 2395-2:1994-095, 6 |
| DIN EN 10305-5:2010-053, 5 | EN 10305-5:2010 | Withdrawn | DIN EN 10305-5:2003-083, 5 |
| DIN EN 10305-5:2016-083 | EN 10305-5:2016 | Withdrawn | DIN EN 10305-5:2010-053 |
The first German edition, DIN EN 10305-5:2003-08, replaced DIN 2395-1:1994-09 (dimensions for general use) and DIN 2395-2:1994-09 (technical delivery conditions for general use).5, 6, 10
Was there an ASTM equivalent of EN 10305-5?
ASTM A513/A513M covers electric-resistance-welded carbon and alloy steel mechanical tubing made from hot-rolled or cold-rolled steel, in round, square, rectangular and special shapes. It defines numbered types: Types 1a, 1b and 2 are as-welded, Types 3 and 4 are sink-drawn, Type 5 is drawn over a mandrel and Type 6 has a special smooth inside diameter.11
Sources
- iTeh Standards. EN 10305-3:2023, catalogue entry with foreword preview. standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023 Checked 20 November 2026.
- Intertek Inform. EN 10305-5:2016 (withdrawn), catalogue entry with scope. shop.standards.ie/en-ie/standards/en-10305-5-2016-333483_saig_cen_cen_766278 Checked 20 November 2026.
- DIN Media. DIN EN 10305-5:2016-08 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-5/251709341 Checked 20 November 2026.
- UNI, Ente Italiano di Normazione. EN 10305-3:2023, store entry with scope. store.uni.com/en/en-10305-3-2023 Checked 20 November 2026.
- DIN Media. DIN EN 10305-5:2003-08 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-5/46631070 Checked 20 November 2026.
- DIN Media. DIN 2395-2:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2395-2/2355917 Checked 20 November 2026.
- ÚNMS SR, Slovak Office of Standards, Metrology and Testing. STN EN 10305-3 (2024), preview with the title page of EN 10305-3:2023. normy.normoff.gov.sk/norma/138662/nahlad Checked 20 November 2026.
- EVS, Estonian Centre for Standardisation and Accreditation. EVS-EN 10305-4:2016, catalogue entry with scope. evs.ee/en/evs-en-10305-4-2016 Checked 20 November 2026.
- Van Leeuwen Pipe and Tube. Carbon steel precision tubes and bars, product listing. vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars Checked 20 November 2026.
- DIN Media. DIN 2395-1:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2395-1/2355788 Checked 20 November 2026.
- ASTM International. ASTM A513/A513M-25, Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing. store.astm.org/a0513_a0513m-25.html Checked 20 November 2026.
About this page
This page is generated from a graph of individual statements. Each statement carries its source and the date we checked it. Passages marked ‘Our reading’ are our own interpretation, with a stated confidence.
The page explains the standard and does not reproduce it. For design, ordering and inspection the standard itself is authoritative; it is sold by the national standards bodies. Supplier pages are cited as examples of trade practice, not as recommendations.
All statements and sources of this page as data: JSON.
About the author. Udo Bange has provided marketing support to companies in the steel tube and pipe industry for 25 years, among them Mannesmann, DMV, Europipe, the European Pipeline Research Group (EPRG), Gräbener Maschinentechnik and Standard-Metallwerke.