precision.tube

EN 10305 series

DIN, ASTM and EN 10305which older and foreign standards match which part

The EN 10305 parts replaced four German DIN standards in 2003. ASTM and SAE specifications were not replaced; they exist in parallel and can only be compared.1, 2, 3, 4, 5

Which standard replaced DIN 2391?

DIN 2391 was replaced by EN 10305-1. In Germany, DIN EN 10305-1:2003-02 took the place of DIN 2391-1:1994-09 and DIN 2391-2:1994-09; the current edition is DIN EN 10305-1:2016-08.1, 6

Three things changed that matter when reading an old drawing. The two DIN documents, one for dimensions and one for technical delivery conditions, became a single standard. The delivery condition codes BK, BKW, BKS, GBK and NBK became +C, +LC, +SR, +A and +N. And steel names changed with the move to the European standards, as the examples further down show.5, 7, 8, 9, 10

Which DIN standards did the other parts replace?

1995200020052010201520202025Part 1seamless, cold drawnDIN 2391, 19942003-022010-052016-08Part 4seamless, hydraulic and pneumatic2003-102011-042016-08Part 2welded, cold drawnDIN 2393, 19942003-022010-052016-08Part 6welded, hydraulic and pneumatic2005-082016-08Part 3welded, cold sizedDIN 2394, 19942003-022010-052016-082024-02Part 5welded, cold sized, square and rectangularDIN 2395, 19942003-082010-052016-08merged into Part 3 in 2023
German editions of each part by publication date. Squares are the DIN standards replaced in 2003, dots are editions, and the large dot is the current one. The dashed line marks the date of our check. Parts 4 and 6 have no DIN predecessor named in DIN’s catalogue. Sources as in the table below.
German predecessors and editions of each part
EN 10305 partFirst German editionGerman standards it replacedLater German editionsToday
Part 1: seamless, cold drawnDIN EN 10305-1:2003-021DIN 2391-1:1994-09 (Seamless precision steel tubes, Part 1: Dimensions); DIN 2391-2:1994-09 (Seamless precision steel tubes, Part 2: Technical delivery conditions)12010-05, 2016-081, 6, 9Current: DIN EN 10305-1:2016-086, 9
Part 2: welded, cold drawnDIN EN 10305-2:2003-022DIN 2393-1:1994-09 (Welded precision steel tubes, Part 1: Dimensions); DIN 2393-2:1994-09 (Welded precision steel tubes, Part 2: Technical delivery conditions)2, 112010-05, 2016-082, 12, 13Current: DIN EN 10305-2:2016-0812, 13
Part 3: welded, cold sizedDIN EN 10305-3:2003-023DIN 2394-1:1994-09 (As-welded and sized precision steel tubes, Part 1: Dimensions); DIN 2394-2:1994-09 (As-welded and sized precision steel tubes, Part 2: Technical delivery conditions)32010-05, 2016-08, 2024-023, 14, 15, 16Current: DIN EN 10305-3:2024-0215, 16
Part 4: seamless, hydraulic linesDIN EN 10305-4:2003-1017None named in DIN’s catalogue entry172011-04, 2016-0817, 18Current: DIN EN 10305-4:2016-0818
Part 5: square, rectangularDIN EN 10305-5:2003-084DIN 2395-1:1994-09 (Rectangular and square welded precision steel tubes, Part 1: Dimensions for general use); DIN 2395-2:1994-09 (Rectangular and square welded precision steel tubes, Part 2: Technical terms of delivery for general use)4, 192010-05, 2016-084, 20Withdrawn; replaced by DIN EN 10305-3:2024-0220, 21
Part 6: welded, hydraulic linesDIN EN 10305-6:2005-0822, 23None named in DIN’s catalogue entry222016-0823, 24Current: DIN EN 10305-6:2016-0823, 24

Data: CSV, JSON.

Each of the four German predecessors came as a pair: one document for dimensions and one for technical delivery conditions. The EN 10305 parts that replaced them hold both in one document.7, 8, 9, 11, 19, 25, 26, 27, 28

The first German edition of Part 4 was DIN EN 10305-4:2003-10. DIN’s catalogue entry names no earlier German standard that it replaced.17 DIN’s catalogue entry for the first edition of Part 6, DIN EN 10305-6:2005-08, names no earlier German standard that it replaced.22 DIN 2445-2:2000-09, which covers precision steel tubes for hydraulic systems from 100 to 500 bar under dynamic loads, is a separate standard and is still listed as current.29

How do the old delivery condition codes map to the new symbols?

With the European standard, letter codes for the delivery condition gave way to plus-symbols. A stockholder’s listing pairs them: BK with +C, BKW with +LC, BKS with +SR, GBK with +A and NBK with +N for drawn tubes, and BKM with +CR1 and +CR2 for sized tubes.10

Delivery conditions: old codes and current symbols
SymbolOld codeManufacturer’s designationWhat it meansListed by one stockholder for
+CBK10Cold finished, hard31No heat treatment after the final cold forming pass.31Parts 1 and 210
+LCBKW10Cold finished, soft31A final heat treatment followed by a light cold drawing pass.31Part 210
+SRBKS10Cold finished and stress-relieved31Heat treated after the last cold forming pass to reduce internal stresses.31Parts 1 and 210
+AGBK10Soft annealed31Annealed after the last cold forming pass.31Part 210
+NNBK10Normalized31, 32Normalized after the last cold forming pass.31, 32Parts 1, 2, 3 and 410
+CR1BKM10Welded and size-rolled32Normally not heat treated; a final anneal is possible.32Parts 3 and 510
+CR2BKM / soft10Welded and size-rolled32No heat treatment after welding and size-rolling.32Parts 3 and 510

Old codes as paired with the symbols in a stockholder’s listing; designations and meanings as given by a manufacturer. Data: CSV, JSON.

Steel names changed as well. A stockholder’s conversion chart gives examples for welded tube: RSt 34-2 to DIN 2394 became E195 to EN 10305-3, and St 37.2 to DIN 2395 became E235 to EN 10305-5.5

Which ASTM and SAE specifications come closest?

A stockholder’s chart of the Euronorms notes that API and ASTM standards stay in force alongside them and are not replaced.5

Nearest ASTM and SAE specifications
EN 10305 partNearest specificationWhat that specification coversWhy it is not an equivalent (our reading)
Part 1: seamless, cold drawnASTM A519/A519M33Seamless carbon and alloy steel mechanical tubing, hot-finished or cold-finished. Round tubes up to 12 3/4 in (325 mm) outside diameter; also square, rectangular and special shapes.33Broader than Part 1: it also covers hot-finished tubing, alloy steels and non-round shapes, and its range for round tubes ends at 325 mm where the scope of Part 1 ends at 380 mm.
Part 2: welded, cold drawnASTM A513/A513M, Type 5 (DOM)34Electric-resistance-welded carbon and alloy steel mechanical tubing that is drawn over a mandrel.34A513 is a single specification for all electric-resistance-welded mechanical tubing. Drawn tube is one of several types in it, and grades, tolerances and conditions are defined on its own terms.
Part 3: welded, cold sizedASTM A513/A513M, Types 1a, 1b and 234Electric-resistance-welded mechanical tubing supplied as welded, made from hot-rolled or cold-rolled steel, in round, square, rectangular and special shapes.34A513 tells its as-welded types apart by the strip they are made from. Trade listings for Part 3 tell tubes apart by delivery condition (+CR1, +CR2, +N).
Part 4: seamless, hydraulic linesASTM A822/A822M35Seamless cold-drawn carbon steel tubing for hydraulic system service where forming needs tight-radius bending and flaring. Typical sizes 1/8 to 3 1/2 in (3.2 to 88.9 mm) outside diameter; heat treated after the final cold-working operation.35Written for hydraulic service like Part 4, but with its own sizes, heat treatment wording and tests. Its typical sizes end at 88.9 mm outside diameter.
Part 4: seamless, hydraulic linesSAE J52436Cold drawn and annealed seamless low-carbon steel pressure tubing for hydraulic lines and other uses that need flaring and bending.36An SAE standard, not ASTM, for annealed hydraulic line tubing. A separate specification with its own requirements.
Part 5: square, rectangularASTM A513/A513M, square and rectangular shapes34The same specification covers square and rectangular electric-resistance-welded mechanical tubing.34Square and rectangular tubing is a shape inside A513, never a separate document as it was in EN 10305 until 2023.
Part 6: welded, hydraulic linesSAE J52537Normalized, electric-resistance-welded, cold-drawn, single-wall low-carbon steel pressure tubing for pressure lines and other uses that need bending, flaring, forming and brazing.37An SAE standard, not ASTM. We found no ASTM specification written specifically for welded cold drawn hydraulic line tubing; A513 Type 5 covers the product form as mechanical tubing.

The pairing and the last column are our reading (confidence: moderate). The middle columns restate the scope published by ASTM and SAE. Data: CSV, JSON.

What did EN 10305 replace in the United Kingdom?

In the United Kingdom, a catalogue note records that the EN 10305 parts, together with BS EN 10296-1, BS EN 10296-2 and BS EN 10297-1, superseded BS 6323-1:1982.38

Sources

  1. DIN Media. DIN EN 10305-1:2003-02 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-1/53751164 Checked 20 November 2026.
  2. DIN Media. DIN EN 10305-2:2003-02 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-2/53751251 Checked 20 November 2026.
  3. DIN Media. DIN EN 10305-3:2003-02 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-3/53751278 Checked 20 November 2026.
  4. DIN Media. DIN EN 10305-5:2003-08 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-5/46631070 Checked 20 November 2026.
  5. Van Leeuwen Pipe and Tube. Overview main new Euronorms for pipes and tubes (PDF). vanleeuwen.com/en/assets/File/Tabel%20Euronormen%20ENG.pdf Checked 20 November 2026.
  6. DIN Media. DIN EN 10305-1:2016-08, catalogue entry. dinmedia.de/en/standard/din-en-10305-1/251709111 Checked 20 November 2026.
  7. DIN Media. DIN 2391-1:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2391-1/2357963 Checked 20 November 2026.
  8. DIN Media. DIN 2391-2:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2391-2/2358234 Checked 20 November 2026.
  9. DIN. DIN EN 10305-1:2016-08, standard entry with overview of the series. din.de/en/wdc-beuth:din21:251709111 Checked 20 November 2026.
  10. Van Leeuwen Pipe and Tube. Carbon steel precision tubes and bars, product listing. vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars Checked 20 November 2026.
  11. DIN Media. DIN 2393-1:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2393-1/2358433 Checked 20 November 2026.
  12. DIN Media. DIN EN 10305-2:2016-08, catalogue entry. dinmedia.de/en/standard/din-en-10305-2/251709396 Checked 20 November 2026.
  13. DIN. DIN EN 10305-2:2016-08, standard entry. din.de/en/wdc-beuth:din21:251709396 Checked 20 November 2026.
  14. DIN Media. DIN EN 10305-3:2016-08 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-3/251709158 Checked 20 November 2026.
  15. DIN. DIN EN 10305-3:2024-02, standard entry. din.de/en/wdc-beuth:din21:368040564 Checked 20 November 2026.
  16. DIN Media. DIN EN 10305-3:2024-02, catalogue entry. dinmedia.de/en/standard/din-en-10305-3/368040564 Checked 20 November 2026.
  17. DIN Media. DIN EN 10305-4:2003-10 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-4/59298420 Checked 20 November 2026.
  18. DIN Media. DIN EN 10305-4:2016-08, catalogue entry with overview. dinmedia.de/en/standard/din-en-10305-4/251709296 Checked 20 November 2026.
  19. DIN Media. DIN 2395-2:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2395-2/2355917 Checked 20 November 2026.
  20. DIN Media. DIN EN 10305-5:2016-08 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-5/251709341 Checked 20 November 2026.
  21. iTeh Standards. EN 10305-3:2023, catalogue entry with foreword preview. standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023 Checked 20 November 2026.
  22. DIN Media. DIN EN 10305-6:2005-08 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-6/50519044 Checked 20 November 2026.
  23. DIN Media. DIN EN 10305-6:2016-08, catalogue entry with overview. dinmedia.de/en/standard/din-en-10305-6/251709059 Checked 20 November 2026.
  24. DIN. DIN EN 10305-6:2016-08, standard entry with overview of the series. din.de/en/wdc-beuth:din21:251709059 Checked 20 November 2026.
  25. DIN Media. DIN 2393-2:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2393-2/2358509 Checked 20 November 2026.
  26. DIN Media. DIN 2394-1:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2394-1/2358639 Checked 20 November 2026.
  27. DIN Media. DIN 2394-2:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2394-2/2358692 Checked 20 November 2026.
  28. DIN Media. DIN 2395-1:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2395-1/2355788 Checked 20 November 2026.
  29. DIN Media. DIN 2445-2:2000-09, catalogue entry. dinmedia.de/en/standard/din-2445-2/31733867 Checked 20 November 2026.
  30. Landefeld. Precision-hydraulic tube, seamless, EN 10305-4 (DIN 2445/2), product group. landefeld.de/gruppe/en/precision-hydraulic-tube-seamless-en-10305-4-din-24452-/HR4X1 Checked 20 November 2026.
  31. Mannesmann Precision Tubes. Seamless and drawn precision steel tubes, product page. mannesmann.com/en/products-services/products/seamless-drawn-precision-steel-tubes-mpt.html Checked 20 November 2026.
  32. Mannesmann Precision Tubes. Welded and size-rolled precision steel tubes, product page. mannesmann.com/en/products-services/products/welded-size-rolled-precision-steel-tubes-mpt.html Checked 20 November 2026.
  33. ASTM International. ASTM A519/A519M-24a, Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing. store.astm.org/a0519_a0519m-24a.html Checked 20 November 2026.
  34. ASTM International. ASTM A513/A513M-25, Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing. store.astm.org/a0513_a0513m-25.html Checked 20 November 2026.
  35. ASTM International. ASTM A822/A822M-20, Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service. store.astm.org/a0822_a0822m-20.html Checked 20 November 2026.
  36. SAE International. SAE J524_202512, Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring. saemobilus.sae.org/standards/j524_202512-seamless-low-carbon-steel-tubing-annealed-bending-flaring Checked 20 November 2026.
  37. SAE International. SAE J525_202511, Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring. saemobilus.sae.org/standards/j525_202511-welded-cold-drawn-low-carbon-steel-tubing-annealed-bending-flaring Checked 20 November 2026.
  38. Intertek Inform. BS EN 10305-5:2010 (superseded), catalogue entry with development note. shop.standards.ie/en-ie/standards/bs-en-10305-5-2010-205476_saig_bsi_bsi_487550 Checked 20 November 2026.

About this page

This page is generated from a graph of individual statements. Each statement carries its source and the date we checked it. Passages marked ‘Our reading’ are our own interpretation, with a stated confidence.

The page explains the standard and does not reproduce it. For design, ordering and inspection the standard itself is authoritative; it is sold by the national standards bodies. Supplier pages are cited as examples of trade practice, not as recommendations.

All statements and sources of this page as data: JSON.

About the author. Udo Bange has provided marketing support to companies in the steel tube and pipe industry for 25 years, among them Mannesmann, DMV, Europipe, the European Pipeline Research Group (EPRG), Gräbener Maschinentechnik and Standard-Metallwerke.