EN 10305-3welded cold sized precision steel tubes
EN 10305-3 sets the technical delivery conditions for welded cold sized steel tubes: circular tubes with a specified outside diameter D of up to 193.7 mm, and tubes of square and rectangular cross-section. It may also be applied to other cross-section shapes.1, 2 The current edition, EN 10305-3:2023, also took over the square and rectangular tubes of the former Part 5.2
- Standard
- EN 10305-3: Welded cold sized tubes2
- Tube
- Welded, cold sized1
- Purpose
- General precision applications2
- European edition
- EN 10305-3:20232
- Replaced in Germany
- DIN 2394-1 and DIN 2394-2, in 20036
- Facts checked
- 20 November 2026
What does EN 10305-3 cover?
Like the rest of the series, the tubes are characterized by precisely defined dimensional tolerances and a specified maximum surface roughness.2 The scope names the automotive, furniture and general engineering industries as typical fields of application.2
The German edition is DIN EN 10305-3:2024-02, which DIN lists as current.3, 5 BSI lists BS EN 10305-3:2023, published on 31 December 2023, as current.4 The German edition grew from 27 pages in 2016 to 40 pages in 2024.5, 7
What changed in the 2023 edition?
EN 10305-3:2023 was published in December 2023 and supersedes both EN 10305-3:2016 and EN 10305-5:2016.2, 8 Its foreword lists four changes: Parts 3 and 5 were merged so that one document covers welded cold sized tubes of all shapes; dimensions, thickness ranges and tolerances were aligned; steel grades were added; and the text was updated editorially.2
The table of contents of the new edition has separate tolerance clauses for circular tubes, for square and rectangular tubes and for tubes of other shapes. It has two informative annexes: one on the options available across the EN 10305 series, and one on newer tube steels with a single-phase ferritic microstructure strengthened by nano-precipitates.2, 9
The Estonian catalogue shows the 2016 editions of Parts 3 and 5 as withdrawn from 15 December 2023.10 A large European stockholder still listed square and rectangular welded precision tube under EN 10305-5 when we checked, from 10 × 10 × 1 mm to 70 × 70 × 4 mm square and from 20 × 10 × 1.5 mm to 100 × 40 × 3 mm rectangular, in +CR1 and +CR2 and in steel grades E220 and E235.11
How is the tube made and supplied?
A German manufacturer describes the production route as welding steel strip and then cold rolling the welded tube to size, with heat treatment afterwards where the application needs it.15 DIN’s English overview calls these tubes ‘dimensionally rolled’, a literal rendering of the German maßgewalzt; the standard’s English title says ‘cold sized’.2, 13
Sized tube has delivery conditions of its own. The manufacturer describes +CR1 as welded and size-rolled tube that is normally not heat treated but can be given a final anneal, and +CR2 as tube that receives no heat treatment after welding and size-rolling. The third condition, +N, is tube normalized after the last cold forming pass.15
One European stockholder lists Part 3 tube from 10 × 1 mm to 108 × 2 mm, round and in flat-oval, elliptical and profile shapes, in +CR1, +CR2 and +N and in steel grades E220 and E235, with a 2.2 test report.11 The manufacturer gives its own range as 25 to 114.3 mm outside diameter and 1.75 to 8.5 mm wall thickness.15
EN 10305-3 or EN 10305-2?
Part 2 covers welded tubes that are cold drawn after welding, up to 150 mm outside diameter; Part 3 covers welded tubes that are sized by rolling.1, 16
Which editions have there been?
| German edition | European edition | Status | Replaced |
|---|---|---|---|
| DIN EN 10305-3:2003-026 | EN 10305-3:2002 | Withdrawn | DIN 2394-1:1994-09, DIN 2394-2:1994-096 |
| DIN EN 10305-3:2010-056, 7 | EN 10305-3:2010 | Withdrawn | DIN EN 10305-3:2003-026, 7 |
| DIN EN 10305-3:2016-087 | EN 10305-3:2016 | Withdrawn | DIN EN 10305-3:2010-057 |
| DIN EN 10305-3:2024-023, 5 | EN 10305-3:2023 | Current | DIN EN 10305-3:2016-08 and DIN EN 10305-5:2016-082, 3, 5, 12 |
The first German edition, DIN EN 10305-3:2003-02, replaced DIN 2394-1:1994-09 (dimensions) and DIN 2394-2:1994-09 (technical delivery conditions).6, 17, 18
Is there an ASTM equivalent of EN 10305-3?
ASTM A513/A513M covers electric-resistance-welded carbon and alloy steel mechanical tubing made from hot-rolled or cold-rolled steel, in round, square, rectangular and special shapes. It defines numbered types: Types 1a, 1b and 2 are as-welded, Types 3 and 4 are sink-drawn, Type 5 is drawn over a mandrel and Type 6 has a special smooth inside diameter.19
Sources
- UNI, Ente Italiano di Normazione. EN 10305-3:2023, store entry with scope. store.uni.com/en/en-10305-3-2023 Checked 20 November 2026.
- iTeh Standards. EN 10305-3:2023, catalogue entry with foreword preview. standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023 Checked 20 November 2026.
- DIN. DIN EN 10305-3:2024-02, standard entry. din.de/en/wdc-beuth:din21:368040564 Checked 20 November 2026.
- BSI Knowledge. BS EN 10305-3:2023, catalogue entry. knowledge.bsigroup.com/products/steel-tubes-for-precision-applications-technical-delivery-conditions-welded-cold-sized-tubes-3 Checked 20 November 2026.
- DIN Media. DIN EN 10305-3:2024-02, catalogue entry. dinmedia.de/en/standard/din-en-10305-3/368040564 Checked 20 November 2026.
- DIN Media. DIN EN 10305-3:2003-02 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-3/53751278 Checked 20 November 2026.
- DIN Media. DIN EN 10305-3:2016-08 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-3/251709158 Checked 20 November 2026.
- ÚNMS SR, Slovak Office of Standards, Metrology and Testing. STN EN 10305-3 (2024), preview with the title page of EN 10305-3:2023. normy.normoff.gov.sk/norma/138662/nahlad Checked 20 November 2026.
- DIN. DIN EN 10305-3:2024-02 (E), table of contents. din.de/de/mitwirken/normenausschuesse/fes/veroeffentlichungen/wdc-beuth:din21:368040564/toc-3520972/download Checked 20 November 2026.
- EVS, Estonian Centre for Standardisation and Accreditation. EVS-EN 10305-4:2016, catalogue entry with scope. evs.ee/en/evs-en-10305-4-2016 Checked 20 November 2026.
- Van Leeuwen Pipe and Tube. Carbon steel precision tubes and bars, product listing. vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars Checked 20 November 2026.
- DIN Media. DIN EN 10305-5:2016-08 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-5/251709341 Checked 20 November 2026.
- DIN. DIN EN 10305-1:2016-08, standard entry with overview of the series. din.de/en/wdc-beuth:din21:251709111 Checked 20 November 2026.
- DIN. DIN EN 10305-6:2016-08, standard entry with overview of the series. din.de/en/wdc-beuth:din21:251709059 Checked 20 November 2026.
- Mannesmann Precision Tubes. Welded and size-rolled precision steel tubes, product page. mannesmann.com/en/products-services/products/welded-size-rolled-precision-steel-tubes-mpt.html Checked 20 November 2026.
- GlobalSpec. CEN, EN 10305-2, catalogue entry with scope. standards.globalspec.com/std/10004302/en-10305-2 Checked 20 November 2026.
- DIN Media. DIN 2394-1:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2394-1/2358639 Checked 20 November 2026.
- DIN Media. DIN 2394-2:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2394-2/2358692 Checked 20 November 2026.
- ASTM International. ASTM A513/A513M-25, Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing. store.astm.org/a0513_a0513m-25.html Checked 20 November 2026.
About this page
This page is generated from a graph of individual statements. Each statement carries its source and the date we checked it. Passages marked ‘Our reading’ are our own interpretation, with a stated confidence.
The page explains the standard and does not reproduce it. For design, ordering and inspection the standard itself is authoritative; it is sold by the national standards bodies. Supplier pages are cited as examples of trade practice, not as recommendations.
All statements and sources of this page as data: JSON.
About the author. Udo Bange has provided marketing support to companies in the steel tube and pipe industry for 25 years, among them Mannesmann, DMV, Europipe, the European Pipeline Research Group (EPRG), Gräbener Maschinentechnik and Standard-Metallwerke.